MGS-400 SERIE

 

Gas detectors for using in security systems.

 

Features and benefits:

  • Wide range of gas sensors: IR, electrochemical, catalitics, semiconductor
  • Management and configuration with easy mobile interface
  • Detection of all refrigerans (CFC, HFCs, HCFC,
    HFO’s), i.e. HFO1234YF, HFO1234ZE, R410a & R22
  • Plug-and-play, pre-calibrated sensor's cells
  • Temperature compensation
  • Minimalization of false alarms
  • Does not require calibration after montage
  • Modbus RTU interface for communication with BAS/BMS systems o dedicated systems
  • Internal buzzer and lamp
  • Analog output: 4-20 mA, 0-5V, 1-5V, 0-10V, 2-10V (450, 460 sub-versions)

 

 

DESCRIPTION

 

MGS-400 sensors of Bacharach Company provide the protection in refrigerant systems.

The service is easy and short, saving you time and money on equipment and installations.

MGS-400 is easy for staff. Users can intuitively use, run and stop of gas detectors without specialized training and without tools.

Pre-calibrated sensor modules are made in plug-and-play technology. This simplifies maintenance, requires literally a minute for replacement and does not require the use of calibration gas.

 

MGS-400 detectors can work in local net via Modbus RTU protocol and can be integrated with BMS / BAS / SCADA systems or with optional MGS-408 controler of Bacharach.

AVALIABLE SUB-VERSIONS

MGS-410 DetectorMGS-450 DetektorMGS-460 DetektorMGS-408 Controller

MGS-410 detector is the basic version of the detector.

Among the special features of the series it is characterized in particular by:

  • a gas sensor built into the detector housing
  • Modbus RTU output for operation in network systems
  • no analog 4-20mA output

The MGS-450 detector is a version of the MGS-410 detector extended with an analogue output.

Special features are included:

  • a gas sensor built into the detector housing
  • Modbus RTU output for operation in network systems
  • analog 4-20mA output

The MGS-460 detector is the most developed version of the detector.

Among the special features of the series it is characterized in particular by:

  • remote gas sensor, which makes it possible to locate it in lower or upper area of room, depending on the specific gravity of gas
  • Modbus RTU output for working in net
  • 4-20mA analog output

MGS-408 controller is a device that allows you to connect MGS410, 450 or 460 to net, if customer hasen't own BMS or SCADA system.

AVALIABLE WORK CONFIGURATIONS:

 

Single work mode

 

In the individual mode, the detector can inform:

  • about the gas alarm condition with the use of voice and visual signals
  • about the level of measured gas using the Modbus RTU output
  • about the level of gas measured using the analogue output (450 and 460 sub-versions).

Net work mode

 

In network mode, detectors can be connected to a BMS, Scada system or a dedicated MGS-408 controller, using the Modbus RTU protocol.

STANDARD RANGES OF GAS SENSORS DETECTION

Refrigerants 1,000 ppm
CO2 5,000 / 10,000 / 20,000 / 30,000 / 40,000 / 50,000 ppm
NH3 100 / 1,000 / 5,000 ppm / 100% LEL
O2 30 Vol%
CO 500 / 1,000 ppm
Combustible Gases - Semiconductor ($-289, R-600, CH4, R-600a, HC-12a, R-717) 5,000 ppm
Combustible Gases - Catalytics (R-600, CH4, R-290, NH3 100% LEL
NO2 20 ppm

 

LIST OF GASES

C3H8 (Propane)
C4H10 (Butane)
CO2
CH4
H2 (Hydrogen)
NH3
R-11
R-123
R-134a
R-22
R-23
R-290
R-404A
R-407A
R-407C
R-407F
R-410A
R-448A
R-449A
R-452A
R-507A
R-513A
R-600a

Show the list
Show less